Gameboy Development Forum
Discussion about software development for the old-school Gameboys, ranging from the "Gray brick" to Gameboy Color
(Launched in 2008)
You are not logged in.
Ads
#1 2008-03-08 09:49:18
- Foona
- New member
- From: Sweden
- Registered: 2008-03-08
- Posts: 6
Request schematics for the GBA
I wish to learn the make-ups of a GBA´.
Like..
Is there a chip dedicated only for music in the GBA?
Also anyone with schematics for the GBA out there?
*knowledge is power*
Offline
#2 2008-03-08 13:23:52
- nitro2k01
- Administrator
- Registered: 2008-02-22
- Posts: 249
Re: Request schematics for the GBA
GBATek has some info about that. Basically the GBA sound chip has the four channels that the older models have, as well as two sample playback channels. (Intended for the left and right channel)
Offline
#3 2008-03-08 13:46:49
- nitro2k01
- Administrator
- Registered: 2008-02-22
- Posts: 249
Re: Request schematics for the GBA
Oh yeah, the GBA schematic... This forum is actually intended more for the old school GB models, not the GBA. The reason for this (The reason why I took this initiative in the first place) is because there were really no other active dev communities for the platform. In contrast there are still active forums and actively updated resources for GBA dev.
I recommend you to ask the question about the GBA schematic in the GBADev.org forum. When you say schematic, do you mean for some special part of the GBA? The sound chip? Or the whole GBA?
Offline
#4 2008-03-08 17:33:23
- Foona
- New member
- From: Sweden
- Registered: 2008-03-08
- Posts: 6
Re: Request schematics for the GBA
eh...sorry....
Iv'e must have hit that last "A" by mistake. 
I meant the GB.
Schematics for the entire GB if it's possible.
*knowledge is power*
Offline
#5 2008-03-08 21:42:53
- nitro2k01
- Administrator
- Registered: 2008-02-22
- Posts: 249
Re: Request schematics for the GBA
There you go.
http://gameboygenius.8bitcollective.com … Schematics
These were made by Jeff Frohwein (I presume) long ago. Found on devrs.com.
Offline
#6 2008-03-09 04:32:44
- happyED
- New member
- From: Denmark
- Registered: 2008-03-04
- Posts: 3
Re: Request schematics for the GBA
When I make mods I just try my my, and do not know much abot elek. Is there some good places to learn hov to understand sucts schematics.
Offline
#7 2008-03-09 07:29:26
- Foona
- New member
- From: Sweden
- Registered: 2008-03-08
- Posts: 6
Re: Request schematics for the GBA
Thanks for the schematics nitro! 
happyED:
Well Awol asked about links to learn elektronics and such.
I gave some answers in this topic:
http://gameboygenius.8bitcollective.com … pid=85#p85
And if you want to learn how to read a schematic then you have to know what all symbols mean.
Wich you will understand if you learn the basics of electronics.
There are sites on the webb explaining the symbols and such, but you would still end up
having to go back to the basics of electronics anyway.
Without it one is kind of lost.
Last edited by Foona (2008-03-09 07:33:23)
*knowledge is power*
Offline