Difference between revisions of "CPU Registers and Flags"
| Line 1: | Line 1: | ||
| − | {{Pandocs| | + | {{Pandocs|registers-and-flags}} |
===Registers=== | ===Registers=== | ||
Latest revision as of 21:21, 4 April 2020
The copy of Pan Docs hosted on this wiki is considered deprecated.
Pan Docs is now officially hosted on gbdev.io as a living document. Please go to https://gbdev.io/pandocs/ to read Pan Docs or to https://github.com/gbdev/pandocs to contribute.
Click here to go to this section of Pan Docs in the new location: https://gbdev.io/pandocs/#registers-and-flags
Contents
Registers
16bit Hi Lo Name/Function AF A - Accumulator & Flags BC B C BC DE D E DE HL H L HL SP - - Stack Pointer PC - - Program Counter/Pointer
As shown above, most registers can be accessed either as one 16bit register, or as two separate 8bit registers.
The Flag Register (lower 8bit of AF register)
Bit Name Set Clr Expl. 7 zf Z NZ Zero Flag 6 n - - Add/Sub-Flag (BCD) 5 h - - Half Carry Flag (BCD) 4 cy C NC Carry Flag 3-0 - - - Not used (always zero)
Conatins the result from the recent instruction which has affected flags.
The Zero Flag (Z)
This bit becomes set (1) if the result of an operation has been zero (0). Used for conditional jumps.
The Carry Flag (C, or Cy)
Becomes set when the result of an addition became bigger than FFh (8bit) or FFFFh (16bit). Or when the result of a subtraction or comparision became less than zero (much as for Z80 and 80x86 CPUs, but unlike as for 65XX and ARM CPUs). Also the flag becomes set when a rotate/shift operation has shifted-out a "1"-bit. Used for conditional jumps, and for instructions such like ADC, SBC, RL, RLA, etc.
The BCD Flags (N, H)
These flags are (rarely) used for the DAA instruction only, N Indicates whether the previous instruction has been an addition or subtraction, and H indicates carry for lower 4bits of the result, also for DAA, the C flag must indicate carry for upper 8bits. After adding/subtracting two BCD numbers, DAA is intended to convert the result into BCD format; BCD numbers are ranged from 00h to 99h rather than 00h to FFh. Because C and H flags must contain carry-outs for each digit, DAA cannot be used for 16bit operations (which have 4 digits), or for INC/DEC operations (which do not affect C-flag).
