Difference between revisions of "MBC2"
(Created page with '== MBC2 (max 256KByte ROM and 512x4 bits RAM) == ===0000-3FFF - ROM Bank 00 (Read Only)=== Same as for MBC1. ===4000-7FFF - ROM Bank 01-0F (Read Only)=== Same as for MBC1, but …') |
|||
| Line 1: | Line 1: | ||
| + | {{Pandocs|memorybankcontrollers}} | ||
== MBC2 (max 256KByte ROM and 512x4 bits RAM) == | == MBC2 (max 256KByte ROM and 512x4 bits RAM) == | ||
Revision as of 07:19, 25 May 2012
The copy of Pan Docs hosted on this wiki is considered deprecated.
Pan Docs is now officially hosted on gbdev.io as a living document. Please go to https://gbdev.io/pandocs/ to read Pan Docs or to https://github.com/gbdev/pandocs to contribute.
Click here to go to this section of Pan Docs in the new location: https://gbdev.io/pandocs/#memorybankcontrollers
Contents
MBC2 (max 256KByte ROM and 512x4 bits RAM)
0000-3FFF - ROM Bank 00 (Read Only)
Same as for MBC1.
4000-7FFF - ROM Bank 01-0F (Read Only)
Same as for MBC1, but only a total of 16 ROM banks is supported.
A000-A1FF - 512x4bits RAM, built-in into the MBC2 chip (Read/Write)
The MBC2 doesn't support external RAM, instead it includes 512x4 bits of built-in RAM (in the MBC2 chip itself). It still requires an external battery to save data during power-off though. As the data consists of 4bit values, only the lower 4 bits of the "bytes" in this memory area are used.
0000-1FFF - RAM Enable (Write Only)
The least significant bit of the upper address byte must be zero to enable/disable cart RAM. For example the following addresses can be used to enable/disable cart RAM: 0000-00FF, 0200-02FF, 0400-04FF, ..., 1E00-1EFF. The suggested address range to use for MBC2 ram enable/disable is 0000-00FF.
2000-3FFF - ROM Bank Number (Write Only)
Writing a value (XXXXBBBB - X = Don't cares, B = bank select bits) into 2000-3FFF area will select an appropriate ROM bank at 4000-7FFF.
The least significant bit of the upper address byte must be one to select a ROM bank. For example the following addresses can be used to select a ROM bank: 2100-21FF, 2300-23FF, 2500-25FF, ..., 3F00-3FFF. The suggested address range to use for MBC2 rom bank selection is 2100-21FF.
