Difference between revisions of "MBC3"
(Copy from Memory Bank Controllers page) |
|||
| Line 25: | Line 25: | ||
===6000-7FFF - Latch Clock Data (Write Only)=== | ===6000-7FFF - Latch Clock Data (Write Only)=== | ||
| − | When writing 00h, and then 01h to this register, the current time becomes latched into the RTC registers. The latched data will not change until it becomes latched again, by repeating the write 00h->01h procedure. | + | When writing 00h, and then 01h to this register, the current time becomes latched into the RTC registers. The latched data will not change until it becomes latched again, by repeating the write 00h->01h procedure. This is supposed for <reading> from the RTC registers. This can be proven by reading the latched (frozen) time from the RTC registers, and then unlatch the registers to show the clock itself continues to tick in background. |
| − | This is supposed for <reading> from the RTC registers. | + | |
===The Clock Counter Registers=== | ===The Clock Counter Registers=== | ||
Revision as of 01:21, 29 December 2014
The copy of Pan Docs hosted on this wiki is considered deprecated.
Pan Docs is now officially hosted on gbdev.io as a living document. Please go to https://gbdev.io/pandocs/ to read Pan Docs or to https://github.com/gbdev/pandocs to contribute.
Click here to go to this section of Pan Docs in the new location: https://gbdev.io/pandocs/#memorybankcontrollers
Contents
- 1 MBC3 (max 2MByte ROM and/or 32KByte RAM and Timer)
- 1.1 0000-3FFF - ROM Bank 00 (Read Only)
- 1.2 4000-7FFF - ROM Bank 01-7F (Read Only)
- 1.3 A000-BFFF - RAM Bank 00-03, if any (Read/Write)
- 1.4 A000-BFFF - RTC Register 08-0C (Read/Write)
- 1.5 0000-1FFF - RAM and Timer Enable (Write Only)
- 1.6 2000-3FFF - ROM Bank Number (Write Only)
- 1.7 4000-5FFF - RAM Bank Number - or - RTC Register Select (Write Only)
- 1.8 6000-7FFF - Latch Clock Data (Write Only)
- 1.9 The Clock Counter Registers
- 1.10 The Day Counter
- 1.11 Delays
MBC3 (max 2MByte ROM and/or 32KByte RAM and Timer)
Beside for the ability to access up to 2MB ROM (128 banks), and 32KB RAM (4 banks), the MBC3 also includes a built-in Real Time Clock (RTC). The RTC requires an external 32.768 kHz Quartz Oscillator, and an external battery (if it should continue to tick when the gameboy is turned off).
0000-3FFF - ROM Bank 00 (Read Only)
Same as for MBC1.
4000-7FFF - ROM Bank 01-7F (Read Only)
Same as for MBC1, except that accessing banks 20h, 40h, and 60h is supported now.
A000-BFFF - RAM Bank 00-03, if any (Read/Write)
A000-BFFF - RTC Register 08-0C (Read/Write)
Depending on the current Bank Number/RTC Register selection (see below), this memory space is used to access an 8KByte external RAM Bank, or a single RTC Register.
0000-1FFF - RAM and Timer Enable (Write Only)
Mostly the same as for MBC1, a value of 0Ah will enable reading and writing to external RAM - and to the RTC Registers! A value of 00h will disable either.
2000-3FFF - ROM Bank Number (Write Only)
Same as for MBC1, except that the whole 7 bits of the RAM Bank Number are written directly to this address. As for the MBC1, writing a value of 00h, will select Bank 01h instead. All other values 01-7Fh select the corresponding ROM Banks.
4000-5FFF - RAM Bank Number - or - RTC Register Select (Write Only)
As for the MBC1s RAM Banking Mode, writing a value in range for 00h-03h maps the corresponding external RAM Bank (if any) into memory at A000-BFFF. When writing a value of 08h-0Ch, this will map the corresponding RTC register into memory at A000-BFFF. That register could then be read/written by accessing any address in that area, typically that is done by using address A000.
6000-7FFF - Latch Clock Data (Write Only)
When writing 00h, and then 01h to this register, the current time becomes latched into the RTC registers. The latched data will not change until it becomes latched again, by repeating the write 00h->01h procedure. This is supposed for <reading> from the RTC registers. This can be proven by reading the latched (frozen) time from the RTC registers, and then unlatch the registers to show the clock itself continues to tick in background.
The Clock Counter Registers
08h RTC S Seconds 0-59 (0-3Bh)
09h RTC M Minutes 0-59 (0-3Bh)
0Ah RTC H Hours 0-23 (0-17h)
0Bh RTC DL Lower 8 bits of Day Counter (0-FFh)
0Ch RTC DH Upper 1 bit of Day Counter, Carry Bit, Halt Flag
Bit 0 Most significant bit of Day Counter (Bit 8)
Bit 6 Halt (0=Active, 1=Stop Timer)
Bit 7 Day Counter Carry Bit (1=Counter Overflow)
The Halt Flag is supposed to be set before <writing> to the RTC Registers.
The Day Counter
The total 9 bits of the Day Counter allow to count days in range from 0-511 (0-1FFh). The Day Counter Carry Bit becomes set when this value overflows. In that case the Carry Bit remains set until the program does reset it. Note that you can store an offset to the Day Counter in battery RAM. For example, every time you read a non-zero Day Counter, add this Counter to the offset in RAM, and reset the Counter to zero. This method allows to count any number of days, making your program Year-10000-Proof, provided that the cartridge gets used at least every 511 days.
Delays
When accessing the RTC Registers it is recommended to execute a 4ms delay (4 Cycles in Normal Speed Mode) between the separate accesses.
