Difference between revisions of "Memory Map"
m |
m (Fix wikilink and remove stray ']') |
||
| Line 65: | Line 65: | ||
|FFFF | |FFFF | ||
|FFFF | |FFFF | ||
| − | |[Interrupts | + | |[[Interrupts]] Enable Register |
| | | | ||
|} | |} | ||
Revision as of 04:29, 5 January 2015
The gameboy has a 16bit address bus, that is used to address ROM, RAM, and I/O registers.
Contents
General Memory Map
| Start | End | Description | Notes |
| 0000 | 3FFF | 16KB ROM bank 00 | From cartridge, fixed bank |
| 4000 | 7FFF | 16KB ROM Bank 01~NN | From cartridge, switchable bank via MBC |
| 8000 | 9FFF | 8KB Video RAM (VRAM) | Switchable bank 0/1 in CGB mode |
| A000 | BFFF | 8KB External RAM | In cartridge, switchable bank if any |
| C000 | CFFF | 4KB Work RAM (WRAM) bank 0 | |
| D000 | DFFF | 4KB Work RAM bank 1~N | Switchable bank 1~7 in CGB mode |
| E000 | FDFF | Mirror of C000~DDFF (ECHO) | Typically not used |
| FE00 | FE9F | Sprite attribute table (OAM) | |
| FEA0 | FEFF | Not Usable | |
| FF00 | FF7F | I/O Registers | |
| FF80 | FFFE | High RAM (HRAM) | |
| FFFF | FFFF | Interrupts Enable Register |
Jump Vectors in first ROM bank
The following addresses are supposed to be used as jump vectors:
- RST commands: 0000,0008,0010,0018,0020,0028,0030,0038
- Interrupts: 0040,0048,0050,0058,0060
However, the memory may be used for any other purpose in case that your program doesn't use any (or only some) RST commands or interrupts. RST commands are 1-byte opcodes that work similiar to CALL opcodes, except that the destination address is fixed.
Cartridge Header in first ROM bank
The memory at 0100-014F contains the cartridge header. This area contains information about the program, its entry point, checksums, information about the used MBC chip, the ROM and RAM sizes, etc. Most of the bytes in this area are required to be specified correctly. For more information read the chapter about The Cartridge Header.
External Memory and Hardware
The areas from 0000-7FFF and A000-BFFF may be used to connect external hardware. The first area is typically used to address ROM (read only, of course), cartridges with Memory Bank Controllers (MBCs) are additionally using this area to output data (write only) to the MBC chip. The second area is often used to address external RAM, or to address other external hardware (Real Time Clock, etc). External memory is often battery buffered, and may hold saved game positions and high score tables (etc.) even when the gameboy is turned of, or when the cartridge is removed. For specific information read the chapter about Memory Bank Controllers.
