Gameboy Bootstrap ROM
The DMG bootstrap
On July 17, 2003, neviksti published that he had been able to extract the contents of the Gameboy boot ROM from a DMG-01 on the Cherryroms.com forums. The boot ROM is a bootstrap program which is a 256 bytes big piece of code which checks the cartridge header is correct, scrolls the Nintendo bootup graphics and plays the "po-ling" sound.
When the Gameboy is turned on, the bootstrap ROM is situated in a memory page at positions $0-$FF (0-255). The CPU enters at $0 at startup, and the last two instructions of the code writes to a special register which disables the internal ROM page, thus making the lower 256 bytes of the cartridge ROM readable. The last instruction is situated at position $FE and is two bytes big, which means that right after that instruction has finished, the CPU executes the instruction at $100, which is the entry point code on a cartridge.
Neviksti managed to read out this memory area by opening the CPU of a Gameboy he got from Duo, and looking at it with a microscope. That way he managed to read the code bit by bit.
The SGB bootstrap
On September 16th, 2009, Costis Sideris was able to extract the Super Gameboy bootrom using a form of clock glitching involving an FPGA. See Costis' page describing the dumping. The clock crystal for the SGB was disconnected and instead controlled by the FPGA. After viewing an address bus trace (which shows the address as the bootrom is reading/writing to the $FFxx i/o space, but not the data), he found which exact clock cycle the write to the $FF50 register (which disables the bootrom) was. He then caused the FPGA to clock the SGB CPU at 4 times the normal speed for that write cycle only. This caused the CPU to glitch, the disable write to fail to properly occur, and the program counter to continue past there to $100 and onward, into cartridge rom space. A program was placed in that area which wrote the bootrom out byte by byte to the FPGA (using a bogus cartridge-address-space address which the FPGA recognized).
When the Super Gameboy is turned on, the first part of the bootrom is not very different from the DMG one; it sets up sound registers and clears vram, but also writes 0x30 to the $ff00 keypad port (which the sgb uses as a bit-banged serial output port in addition to its keypad reading function). After that however, it clears WRAM bytes $c05f to $c058, and then copies the cartridge header ($104 to $14f) to WRAM at $c000-$c057, placing count and sum bytes at $c000-$c001, $c010-$c011, $c020-$c021, $c030-$c031, $c040-$c041 and $c050-$c051. This data is then bit-banged as a giant packet over the $ff00 port to the snes. See Just Dessert's disassembly at the Bannister MAME subforum. Unlike the DMG and CGB bootroms, the bootrom does NOT lock out the cartridge if the header sum or logo is wrong; its the SNES which does that!
The CGB bootstrap
Neviksti has also tried to extract the bootstrap from a Gameboy Color (CGB-01) CPU. However, because that CPU uses NAND ROM and is laid out in a different way, he had no success in extracting that ROM. Based on some limited preliminary decapsulation work done by Dr. Decapitator, it was determined that the CGB CPU die has three roms on it: one 256 bytes, one 512 bytes, and one 1792 bytes.
On September 21st, 2009, Costis Sideris was able to extract the Gameboy Color bootrom using a combination of clock and power glitching involving an FPGA. See Costis' page describing the dumping. The clock crystal for the CGB was disconnected and instead controlled by the FPGA, as well as the 3.3v power pin for the CGB CPU. After viewing an address bus trace (which shows the address as the bootrom is reading/writing to the $FFxx i/o space, but not the data), he found which exact clock cycle the write to the $FF50 register (which disables the bootrom) was, but attempting a similar clock glitch attack as the SGB didn't work. Instead, he used a much more 'brute force' attack after observing that unlike the DMG and SGB, the CGB cpu uses dynamic logic and loses its state when not clocked for a few seconds. He HALTED the cpu clock before the write, and in addition dropped the 3.3v line down to near 0v (to help randomize the internal register contents). This caused both the disable write to fail to properly occur, and the CPU's program counter and other registers to be filled with random values. After doing this several times, the program counter ended up pointing into external cartridge rom space, which contained a long chain of NOPS and a dumping program. The dumping program wrote the bootrom out byte by byte to the FPGA (using a bogus cartridge-address-space address which the FPGA recognized). The rom dump includes the 256 byte rom (0x0000-0x00FF) and the 1792 byte rom (0x0200-0x08FF) which Dr. Decapitator observed, but not the 512 byte rom, which may be cpu microcode or lcd color lookup related.
The 'Pokemon' CGB bootstrap
An interesting 'prototype' or alternate version of the CGB bootrom can be found included in the "Pokemon Stadium" N64 cartridge rom. This might possibly have been a leftover from an earlier prototype "Pokemon Stadium" cartridge which actually had a variant CGB CPU on it which would retrieve its rom from the n64 rom. The final n64 cartridge does not have a CGB CPU on it, but it does emulate the CGB hardware using N64 software, but is locked to only running the pokemon CGB games, which are copied, ram and rom, out of the cart on startup. The pokemon stadium 'emulator' code probably does use the bootstrap when starting up.
Apart from amazement, the dumping of the DMG bootrom led to the inclusion of a feature to emulate the bootstrap ROM in the emulators KiGB and BGB. The dumping of the SGB bootrom led to the inclusion of support for it in the MESS emulator.
As a result of the process, neviksti also published pictures of the rest of the chip. All material published in conjunction with the hack can be found here: 
The following invention is claimed for the bootstrap:
- US Patent #5,134,391 - System for preventing the use of an unauthorized external memory
Contents of the ROM
Below is the disassembled code of the bootstrap ROM, together with Neviksti's comments. A binary file of the 256 byte area can be downloaded here: . The disassembled ROM file can also be found here: .
LD SP,$fffe ; $0000 Setup Stack XOR A ; $0003 Zero the memory from $8000-$9FFF (VRAM) LD HL,$9fff ; $0004 Addr_0007: LD (HL-),A ; $0007 BIT 7,H ; $0008 JR NZ, Addr_0007 ; $000a LD HL,$ff26 ; $000c Setup Audio LD C,$11 ; $000f LD A,$80 ; $0011 LD (HL-),A ; $0013 LD ($FF00+C),A ; $0014 INC C ; $0015 LD A,$f3 ; $0016 LD ($FF00+C),A ; $0018 LD (HL-),A ; $0019 LD A,$77 ; $001a LD (HL),A ; $001c LD A,$fc ; $001d Setup BG palette LD ($FF00+$47),A ; $001f LD DE,$0104 ; $0021 Convert and load logo data from cart into Video RAM (the tile for ®) LD HL,$8010 ; $0024 Addr_0027: LD A,(DE) ; $0027 CALL $0095 ; $0028 CALL $0096 ; $002b INC DE ; $002e LD A,E ; $002f CP $34 ; $0030 JR NZ, Addr_0027 ; $0032 LD DE,$00d8 ; $0034 Load 8 additional bytes into Video RAM LD B,$08 ; $0037 Addr_0039: LD A,(DE) ; $0039 INC DE ; $003a LD (HL+),A ; $003b INC HL ; $003c DEC B ; $003d JR NZ, Addr_0039 ; $003e LD A,$19 ; $0040 Setup background tilemap LD ($9910),A ; $0042 LD HL,$992f ; $0045 Addr_0048: LD C,$0c ; $0048 Addr_004A: DEC A ; $004a JR Z, Addr_0055 ; $004b LD (HL-),A ; $004d DEC C ; $004e JR NZ, Addr_004A ; $004f LD L,$0f ; $0051 JR Addr_0048 ; $0053 ; === Scroll logo on screen, and play logo sound=== Addr_0055: LD H,A ; $0055 Initialize scroll count, H=0 LD A,$64 ; $0056 LD D,A ; $0058 set loop count, D=$64 LD ($FF00+$42),A ; $0059 Set vertical scroll register LD A,$91 ; $005b LD ($FF00+$40),A ; $005d Turn on LCD, showing Background INC B ; $005f Set B=1 Addr_0060: LD E,$02 ; $0060 Addr_0062: LD C,$0c ; $0062 Addr_0064: LD A,($FF00+$44) ; $0064 wait for screen frame CP $90 ; $0066 JR NZ, Addr_0064 ; $0068 DEC C ; $006a JR NZ, Addr_0064 ; $006b DEC E ; $006d JR NZ, Addr_0062 ; $006e LD C,$13 ; $0070 INC H ; $0072 increment scroll count LD A,H ; $0073 LD E,$83 ; $0074 CP $62 ; $0076 $62 counts in, play sound #1 JR Z, Addr_0080 ; $0078 LD E,$c1 ; $007a CP $64 ; $007c JR NZ, Addr_0086 ; $007e $64 counts in, play sound #2 Addr_0080: LD A,E ; $0080 play sound LD ($FF00+C),A ; $0081 INC C ; $0082 LD A,$87 ; $0083 LD ($FF00+C),A ; $0085 Addr_0086: LD A,($FF00+$42) ; $0086 SUB B ; $0088 LD ($FF00+$42),A ; $0089 scroll logo up if B=1 DEC D ; $008b JR NZ, Addr_0060 ; $008c DEC B ; $008e set B=0 first time JR NZ, Addr_00E0 ; $008f ... next time, cause jump to "Nintendo Logo check" LD D,$20 ; $0091 use scrolling loop to pause JR Addr_0060 ; $0093 ; ==== Graphic routine ==== LD C,A ; $0095 "Double up" all the bits of the graphics data LD B,$04 ; $0096 and store in Video RAM Addr_0098: PUSH BC ; $0098 RL C ; $0099 RLA ; $009b POP BC ; $009c RL C ; $009d RLA ; $009f DEC B ; $00a0 JR NZ, Addr_0098 ; $00a1 LD (HL+),A ; $00a3 INC HL ; $00a4 LD (HL+),A ; $00a5 INC HL ; $00a6 RET ; $00a7 Addr_00A8: ;Nintendo Logo .DB $CE,$ED,$66,$66,$CC,$0D,$00,$0B,$03,$73,$00,$83,$00,$0C,$00,$0D .DB $00,$08,$11,$1F,$88,$89,$00,$0E,$DC,$CC,$6E,$E6,$DD,$DD,$D9,$99 .DB $BB,$BB,$67,$63,$6E,$0E,$EC,$CC,$DD,$DC,$99,$9F,$BB,$B9,$33,$3E Addr_00D8: ;More video data (the tile data for ®) .DB $3C,$42,$B9,$A5,$B9,$A5,$42,$3C ; ===== Nintendo logo comparison routine ===== Addr_00E0: LD HL,$0104 ; $00e0 ; point HL to Nintendo logo in cart LD DE,$00a8 ; $00e3 ; point DE to Nintendo logo in DMG rom Addr_00E6: LD A,(DE) ; $00e6 INC DE ; $00e7 CP (HL) ; $00e8 ;compare logo data in cart to DMG rom JR NZ,$fe ; $00e9 ;if not a match, lock up here INC HL ; $00eb LD A,L ; $00ec CP $34 ; $00ed ;do this for $30 bytes JR NZ, Addr_00E6 ; $00ef LD B,$19 ; $00f1 LD A,B ; $00f3 Addr_00F4: ADD (HL) ; $00f4 INC HL ; $00f5 DEC B ; $00f6 JR NZ, Addr_00F4 ; $00f7 ADD (HL) ; $00f9 JR NZ,$fe ; $00fa ; if $19 + bytes from $0134-$014D don't add to $00 ; ... lock up LD A,$01 ; $00fc LD ($FF00+$50),A ; $00fe ;turn off DMG rom